Division of Housing and Community Renewal Bulletin No. DH-46

Subject
April 2010 Performance Advances for Graded and NS Equated to Grade Employees Represented by the Rent Regulation Services Unit (RRSU)
Date Issued
March 23, 2010

Purpose

To explain OSC’s automatic processing and to provide instructions for payments not processed automatically.

Affected Employees

Eligible employees in Bargaining Unit 67

Background

Chapter 49 of the Laws of 2008, Article 8, Section 131.6 and the 2007-2011 negotiated agreement between the State of New York and the Rent Regulation Services Unit provide for the payment of Performance Advances to eligible RRSU employees.

The agreement also provides for a Performance Advance to an increased Job Rate on the April 2010 Salary Schedule for salary grades 18 through 32. Due to the order OSC will process April payments, the additional monies due to employees whose salaries upon application of a Performance Advance are moving to Job Rate or are currently at or above Job Rate of their salary grade will be processed with the application of the raise immediately following the Performance Advances.This payment will be explained in Payroll Bulletin DH-45 (Salary Increases for Employees Represented by RRSU).

Effective Date(s)

4/1/10 Administration - Paychecks dated 4/28/10, Pay Period 1L

Eligibility Criteria

Performance Advance Requirements

RRSU employees whose annual salary is below the Job Rate of the employee’s current grade on the 4/1/09 Salary Schedule are eligible for a Performance Advance if the employee:

  • has completed one (1) year of service in such  grade by April 1, 2010; and
  • did not receive a Performance Advance in October 2009; and
  • was rated “Satisfactory” or its equivalent on the employee's last annual evaluation date.
Unsatisfactory Ratings

Employees rated ”Unsatisfactory” during Fiscal Year 2009-2010 are not eligible to receive a Performance Advance. Agencies must submit a Job Action Request using the Action/Reason code of DTA/USP (Data Change/Unsatisfactory Performance) and enter Increment Code 0003 to withhold a Performance Advance. The effective date should be the date of the employee’s rating. These transactions should be entered as soon as practicable following the employee’s evaluation date.

OSC Actions

After payroll processing is completed for Pay Period 1L, OSC will process Performance Advances and Promotion Recalculations for eligible graded employees who are Active, on a Paid Leave of Absence (except Sick Leave) or on Workers’ Compensation Leave on 4/1/10.

Performance Advance (Increment Code 0001 and Anniversary Date between 10/2 and 4/1):

OSC will automatically insert a row in the employee’s Job Data page effective 4/1/10 to reflect the Performance Advance (not to exceed the Job Rate) using the Action/Reason code of PAY/PAV (Pay Rate Change/Performance Advance).

Promotion Recalculation (Increment Code 0004):

For employees who are entitled to a revised salary based on their FIS (Fixed Incremented Salary), OSC will automatically insert a row in the employee’s Job Data page effective 4/1/10 to reflect the FIS amount displayed on the Job Data Compensation page using the Action/Reason code of PAY/PMR (Pay Rate Change/Promotion Recalculation). In addition, the FIS amount:

  • must be equal to or greater than the Hiring Rate;
  • must be greater than the employee’s current salary;
  • can exceed the Job Rate of the employee’s current grade.
Workers’ Compensation:

For employees who are receiving Workers’ Compensation under the RRSU Medical Evaluation Program, the supplement will be recalculated by OSC when processing payments for disability dates beginning 4/1/10 (Administration). Transactions processed automatically will appear on the NHRP520, Daily Outbound Transaction file.

Automatic Update of Increment Codes

OSC will automatically update the Increment Codes, as appropriate, on the inserted rows for employees who receive a Performance Advance or Promotion Recalculation. After the Performance Advances and Promotion Recalculations are processed in Pay Period 1L, OSC will automatically insert a row and update the Increment Codes of employees with Increment Code 0003 on the Job Data record using the Action/Reason code of DTA/CIC (Data Change/Correct Increment Code) effective 4/1/10 as follows:

Current Code Update to
0001 0001 if the new salary is below Job Rate 2010 if the new salary is equal to Job Rate
0003 0001 if the current salary is equal to or greater than Hiring Rate and below Job Rate and the Anniversary Date is 10/2/XX-4/1/XX
0004 0001 if the new salary is below Job Rate and the Anniversary Date is 10/2/XX-4/1/XX 1001 if the new salary is below Job Rate and the Anniversary Date is 4/2/XX-10/1/XX 2010 if the new salary is equal to or greater than Job Rate

Control-D Report Available Prior to Processing

The following Control-D report will be available after processing of Pay Period 25 (4/2/10-Administration) is completed. This will give agencies time to correct employees’ records, if necessary, before the automatic processing takes place.

NHRP708 Mass Increment Payment Exception Report

This report identifies employees who will not receive an automatic Performance Advance or Promotion Recalculation based on information available at the close of Pay Period 25. Fields on the report include EmplID, Employee Record Number, Employee Name, Grade, Bargaining Unit, Pay Basis Code, Part-time Percentage, Salary, FIS Amount and Increment Code. The report identifies the reason the employee’s salary will not be increased with one of the following messages:

  • Position and job do not match
  • Sal below hiring rate
  • FIS missing
  • FIS at or below current
  • FIS below hiring rate

These messages are based on the employee’s current increment code:

  • Increment code missing
  • Increment code invalid
  • Inc code not in Anniv Date range
  • Sal at or above job rate
  • Salary outside range

If an employee appears on this report but is due a Performance Advance or Promotion Recalculation the agency must:

  • Submit the necessary corrections on the Job Action Request page to correct the data on the incorrect Job row(s) using the appropriate Action/Reason code(s). If the row(s) is corrected prior to Pay Period 1, the automatic Performance Advance or Promotion Recalculation will be applied.
  • Submit a Position Change Request to the Position Management Unit if the data on the Position Data page is incorrect in PayServ but is correct in NYSTEP. The position will be updated to reflect the change and the automatic Performance Advance or Promotion Recalculation will be applied provided the agency’s position request contains the same information as the position information in NYSTEP.

Agency Actions - Pay Period 1

The following procedures must be used by the agency when submitting transactions in Pay Period 1L: For transactions requested on the Job Action Request or Transfer Request page with an effective date on or before 4/1/10:

  • The agency must not include the Performance Advance in the salary reported in the Pay Rate field.
  • The agency must report the proper Increment Code for April 2010.

For transactions requested on the Job Action Request or Transfer Request page with an effective date after 4/1/10:

  • The agency must include, if applicable, the Performance Advance in the salary reported in the Pay Rate field.
  • The agency must report the projected Increment Code based on the employee’s next performance advance cycle.

Employees who are on paid Sick Leave at the time of payment will not receive payments automatically.

  • The agency must enter a request on the Job Action Request page using the appropriate Action/Reason code of PAY/PAV (Pay Rate Change/Performance Advance) or PAY/PMR (Pay Rate Change/Promotion Recalculation) for employees who became eligible for the payments before placement on paid Sick Leave.
Time Entry

To report miscellaneous earnings automatically calculated by the system (i.e. overtime), agencies must separate earnings by pay period so the earnings will not overlap the effective date of the Pay Change.

Control-D Reports Available After Processing

The following Control-D reports will be available for agency review after the automatic payments have been made. All reports will be sorted by agency code, then by employee name in alphabetical order.

NHRP704 Mass Increment Payment Report

This report identifies all employees who received the automatic Performance Advance or Promotion Recalculation. Fields on the report include EmplID, Employee Record Number, Employee Name, Effective Date, Effective Sequence, Grade, Bargaining Unit, Pay Basis Code, Part-time Percentage, Action Reason, Old Comprate, New Comprate and Increment Code.

NHRP708 Mass Increment Payment Exception Report

This report identifies employees who did not receive an automatic Performance Advance or Promotion Recalculation. Fields on the report include EmplID, Employee Record Number, Employee Name, Grade, Bargaining Unit, Pay Basis Code, Part-time Percentage, Salary, FIS Amount and Increment Code. The report identifies the reason the employee’s salary was not increased with one of the following messages:

  • Position and job do not match
  • Sal below hiring rate
  • FIS missing
  • FIS at or below current
  • FIS below hiring rate

These messages are based on the employee’s current increment code:

  • Increment code missing
  • Increment code invalid
  • Inc code not in Anniv Date range
  • Sal at or above job rate

Agency Actions - Pay Period 2

Beginning in Pay Period 2L, agencies that enter Rein Leave transactions on the Job Data page for eligible employees due a Performance Advance, Promotion Recalculation or Increment code update who return from a Leave of Absence without Pay (except Workers’ Compensation Leave) or a Paid Leave of Absence with a reason of Sick Leave or Military Stipend (MLS) must  take the following actions to update the record :If the effective date of the Rein Leave is on or before day one of Pay Period 1, the agency must enter the Rein Leave on the Job Data page and submit a Job Action Request using the appropriate Action/Reason code indicated below effective 4/1/10.

  • For a Performance Advance enter PAY/PAV
  • For a Promotion Recalculation enter PAY/PMR
  • For Increment Code update enter DTA/CIC

If the effective date of the Rein Leave is after the first day of Pay Period 1, the agency must enter the Rein Leave on the Job Data page and submit a Job Action Request using the Action/Reason code of PAY/CSL (Pay Rate Change/Correct Salary) or DTA/CIC (Data Change/Correct Increment Code)and the effective date of the Rein Leave with the next effective sequence number. In addition, the agency must submit transactions for NS equated to grade employees who are due a Performance Advance, Promotion Recalculation or Data Change using the appropriate Action/Reason code (PAY/PAV, PAY/PMR or DTA/CIC) with Pay Period 1 effective dates.

Questions

Questions may be directed to the Salary Determination mailbox.